Patio Remodels in Coral Springs: Before and After

Plenty of Coral Springs homes were built with a plain rectangular concrete patio slab out back — functional, but forgettable. The good news is that slab is often a perfect foundation to build on. Over the past few years we've helped homeowners across Coral Springs turn tired concrete pads into full outdoor living rooms, and the before-and-after difference is dramatic. Here's what those transformations actually involve, and what to expect if you're considering one.

The typical "before": a builder-grade slab

The starting point is usually the same: a flat gray concrete patio, maybe 200–350 square feet, with hairline cracks, faded surface, and standing water after our summer rains because it was never sloped well. It's usable for a grill and a couple of chairs, but it doesn't invite anyone outside — and in a neighborhood where backyards matter, it's leaving value on the table.

The "after": an outdoor living room

A remodel turns that pad into a designed space with zones for cooking, dining, and lounging. The most popular Coral Springs transformations combine several of these elements:

• A resurfaced or expanded deck — overlaying the old slab with stamped concrete, or setting pavers or travertine over a proper base for a high-end look.
• A pergola or louvered roof for shade and rain cover, making the space usable through hurricane season and July heat.
• A built-in outdoor kitchen or bar for entertaining.
• Integrated lighting, fans, and privacy landscaping to make evenings comfortable.

See real Coral Springs and Broward before-and-afters in our gallery.

Can you build on the existing slab?

Sometimes yes, sometimes no — and this is the most important early decision. If the existing concrete is structurally sound with only minor cracks, we can often resurface it with stamped overlay or set pavers over it. But if the slab is badly cracked, settled, or was poured too thin, overlaying it just transfers the problem to the new surface. In that case we recommend removing it and pouring a fresh, properly based patio. We assess this at the estimate so you're not paying to dress up a failing slab.

Getting the base and drainage right

The number-one reason patios fail in South Florida is water. Coral Springs sits on flat terrain with heavy summer rainfall, so a remodeled patio must be sloped away from the house (typically about 1/4 inch per foot) with somewhere for water to go. When we set pavers or travertine, we build on a compacted limerock base with a sand setting bed and proper edge restraint so nothing shifts or floods. Skipping this is why so many DIY and low-bid patios sink within a year or two.

What a remodel costs and how long it takes

Cost depends heavily on scope. A straightforward resurface of an existing slab is the most affordable path; a full teardown with new pavers, a pergola, and an outdoor kitchen is a larger investment. As a rough guide, decorative surfacing runs in the range of $14–$30 per square foot installed depending on material, before add-ons like the pergola or kitchen. Timelines usually run one to three weeks depending on demolition, curing, and permit turnaround. We give you an itemized breakdown so you can phase the project if you'd rather spread it out — and 0% APR financing up to 24 months makes it easier to do it all at once.

Permits and HOA approval

Structural additions like a pergola or outdoor kitchen require permits in Coral Springs, and many of the city's neighborhoods have HOA architectural review for exterior changes. Both are easy to handle when you plan for them — we pull permits in-house and can prepare the drawings your HOA needs, so approvals don't derail your timeline.

Ready to transform your backyard?

Concrete Designs LLC is family-owned, licensed and insured, serving Coral Springs and all of Broward and Miami-Dade since 2004, with a 4.9-star rating from 151 Google reviews. We'll walk your yard, tell you honestly whether to resurface or rebuild, and design an outdoor living space that fits your home and budget. Book your free on-site estimate or call 786-269-9215 to get started.